Connect with us

Adding a voice changer to a baby monitor

Discussion in 'General Electronics Discussion' started by Brent, Nov 16, 2013.

Scroll to continue with content
  1. Brent

    Brent

    1
    0
    Mar 11, 2013
    I am making a talking dog collar for my dog and I'm going to use a baby monitor

    http://www.ebay.com/itm/NEW-FIRST-Y...764?pt=LH_DefaultDomain_0&hash=item2a336932ec

    I want to add a voice changer to the side I'll be speaking into or the side that the voice comes out of but I'm not sure if the voltage going to the speaker will fry the electronics or not. Normal mics don't send hardly any voltage do they? I would expect it to even be a 1 volt. So what I'm asking is how can I do this? I have a toy voice changer that takes a 9v battery but has a fairly large speaker.

    http://www.ebay.com/itm/Multi-Voice...431?pt=LH_DefaultDomain_0&hash=item1c38253787

    Any tips? I don't know if the mic on the baby monitor is both the speaker and the mic or I would just buy a telephone voice changer and tape it to the baby monitor or something. If there is a voltage concern what can I do to overcome that?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-