R
RealGomer
- Jan 1, 1970
- 0
My Coolermaster Praetorian case has a pin out for the from ieee 1394
/Firewire connector as this:
Top Row: TPA-; GND; TPB-; +12V; GND
Bottom Row: TPA+; GND; TPB+; +12V; No Pin
(The diagram on the paper is actually vertical, w/No Pin in the lower
left corner.)
The Gigabyte mobo - GA K8NS Pro has this pin out:
Top Row: TPA2-; GND; TPB2-; Power; GND (Pins 2 - 10)
Bottom Row: TPA2+; GND; TPB2+; No Pin; Power (Pins 1 - 9)
(There's also a 16 pin connector on the mobo, but I have enuff
problems already.)
Does any one know of a converter or something that could be used to
match the up two connectors?
/Firewire connector as this:
Top Row: TPA-; GND; TPB-; +12V; GND
Bottom Row: TPA+; GND; TPB+; +12V; No Pin
(The diagram on the paper is actually vertical, w/No Pin in the lower
left corner.)
The Gigabyte mobo - GA K8NS Pro has this pin out:
Top Row: TPA2-; GND; TPB2-; Power; GND (Pins 2 - 10)
Bottom Row: TPA2+; GND; TPB2+; No Pin; Power (Pins 1 - 9)
(There's also a 16 pin connector on the mobo, but I have enuff
problems already.)
Does any one know of a converter or something that could be used to
match the up two connectors?
