Connect with us

Activating a device that usually accepts a piezo transducer input with a switch?

Discussion in 'General Electronics Discussion' started by dunk1987, Jul 29, 2012.

Scroll to continue with content
  1. dunk1987

    dunk1987

    1
    0
    Jul 29, 2012
    Hello,

    I have a drum module that activates drum sounds using piezo transducers as pickups. However, I instead want to activate the inputs with an on/off switch.

    Could this be done as simply as having a switched circuit output a very small voltage simulating the output of the piezo?
     
  2. john monks

    john monks

    693
    1
    Mar 9, 2012
    Probably not.
    A piezo electric transducer puts out an impulse of voltage proportional to the velocity of the physical impact.
    I don't know what the piezo drives but it probably requires a voltage input.
    You just have to try.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-