Connect with us

Acetone+Flux=?

Discussion in 'General Electronics Discussion' started by eptheta, Nov 20, 2010.

  1. eptheta

    eptheta

    188
    0
    Dec 20, 2009
    I had a bit of marker left after etching my PCB and I wanted to get rid of it. I had already soldered a few chips on and they were rather close.
    So i went ahead and put a bit of acetone on the marker. I missed.

    The acetone and flux reacted and a whitish sticky residue is left. I have no idea what it is and I want to get rid of it. Anyone know what to put on it ?

    Can i use isopropyl alcohol to get rid of the flux and/or the flux-acetone product ?

    Thanks !
     
  2. barathbushan

    barathbushan

    223
    0
    Sep 26, 2009
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-