Connect with us

Accessing the memory of a ink cartridge chip

Discussion in 'Microcontrollers, Programming and IoT' started by Emperor Zoran, Mar 7, 2013.

Scroll to continue with content
  1. Emperor Zoran

    Emperor Zoran

    Mar 7, 2013
    I want access the memory of a ink cartridge chip and restart the ink level and some other variables. Does anyone know how that can be done? It would be preferable to access the cartridge with a computer. What cable connection should I use and what software? I am presuming that some additional electronic circuitry is necessary to make connection with a computer. I would be wary tankful for any assistance. If anyone has ever done this I would like to know there own solution. At the moment I am working on a Lexmark T650n printer and it's ink cartridge. I could find in the maintenance settings page count reset but that does not effect the ink level.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day