Maker Pro
Maker Pro

About connect wires on board

Shay Shtern

May 8, 2018
1
Joined
May 8, 2018
Messages
1
See the photos , any suggestions how?
The closing plastic broken so is can't be connected.
Sorry if I'm not that understand.
 

Attachments

  • 65e0c917-2d25-45db-9a35-e10be083402d.jpg
    65e0c917-2d25-45db-9a35-e10be083402d.jpg
    117.6 KB · Views: 90
  • a93451ab-a35e-48bd-8ad5-6b785ded0ef8.jpg
    a93451ab-a35e-48bd-8ad5-6b785ded0ef8.jpg
    107.9 KB · Views: 83

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
1. change connector (they are available)
2. solder wires directly (not easy)
 

turbogt16v

Mar 27, 2015
176
Joined
Mar 27, 2015
Messages
176
U can pull up female pins up a litle and glue it with super glue,but test before glued
 
Top