Connect with us

ABEL program needs

Discussion in 'General Electronics' started by banu, Nov 26, 2003.

  1. banu

    banu Guest

    HI ALL,

    I am novice to this field of creating abel model,now in
    my application board,i need to create jedec files for an small glue
    logic that was used as inputs to the sram.for that i am using the
    galic which is reprogrammable.for that i need to write an abel model
    for an simple logic which contains three nand gates and two not
    gates,I want to know what are the minimum requirements for writting an
    abel program,like is it enough by just writting equations or else i
    need to describe the truth table and the test vectors.please give me
    your valuable suggestions.

    Thanks in advance,

    With regards,

    sudheervemana.
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-