Connect with us

AB PLC Programming

Discussion in 'General Electronics' started by Laurie Forbes, Sep 16, 2003.

  1. Hello All:

    I have aquired an AB SLC 5.01 PLC and am interested in learning its
    programming. I would appreciate any pointers on where best to obtain
    documentation and, how to access programming software.

    I am hoping this device can be programmed (with ladder logic?) via a
    PC. The only port on the PLC appears to be a phone jack - is it used
    for program downloading?

    Thanks in advance for any assistance..........


    Laurie Forbes
     
  2. Dana Raymond

    Dana Raymond Guest

  3. Thanks for the info but it appears that no inexpensive programming s/w
    is available so my PLC is going to have to sit a while longer. Anyone
    want to buy it :)


    Laurie Forbes
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-