Connect with us

9-16vdc in 12vdc out, product substitute, DIY

Discussion in 'General Electronics Discussion' started by morphingstar, May 14, 2013.

Scroll to continue with content
  1. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    What current does your load draw?

    There are some cheap devices available on eBay, but beware that only a very few allow the input voltage to swing both above and below the output voltage.
  2. morphingstar


    Mar 1, 2012
    thanks Steve
    current / load is somewhat adaptable, probably 0.3 to 5 adc would be a good search range.

    <<allow the input voltage to swing both above and below>>

    what would these be called , search term?
    Last edited: May 16, 2013
  3. BobK


    Jan 5, 2010
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day