lol
heres the answer..
you can program a pgm to trigger when some particular zone types are
trigged..
[10] Latched System Event
The PGM output will activate when any of the selected events occur. It will
deactivate when an access
code is entered.
The normal PGM attributes, programmed in Sections [141] to [154] is replaced
with the following list for
any output selected as Latched System Event:
Light [1] Burglary ......... Delay, Instant, Interior, Stay/Away and 24 Hour
Burglary Zones
Light [2] Fire ................ Fire Keys, Fire Zone and Two Wire Smoke Zone
(PGM Output)
Light [3] Panic ............. Panic Keys and Panic Zone
Light [4] Medical ......... Auxiliary Keys, Medical and Emergency Zones
Light [5] Supervisory ... Supervisory, Freezer and Water Zones
Light [6] Priority ........... Gas, Heat, Sprinkler and 24 Hour Latching
Zones
Light [7] Holdup .......... Holdup Zones and Duress Alarms
Light [8] Not Used
Now if you dont understand this go and read the damn manual ;-)
Spike said:
ah jeeeeeze now I havta download the manual and read the damn thing.
7 or 8 trip, sorry, they don't have to BOTH trip har har
Can you assign one of the pgm outs on these panels to follow particular
zones, in other words, 24hr zones 7 and 8 trip and pgm 2 sinks until
disarmed?