Maker Pro
Maker Pro

74hc6323 alternative

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
I'm looking for an alternative for the 74hc6323.

The key requirements are that it has an integral oscillator (I.e. just connects to the crystal directly), works to at least 20MHz, divides by 4, and is available.

preferably so-8 or similar, 5V operation, fundamental (not 3rd overtone), cheap, low power, and from someone with reasonable shipping.

programmable divide options would be nice but not essential.

I only need a few, perhaps 20 to start with, or up to 100 if they are cheap.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Good catch.

Thanks.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
I'm also looking at the NJU6311. Apart from the smaller package, does anyone see any disadvantages?

It's cheaper and looks like it will require fewer external components.
 
Top