Connect with us

741 OpAmp

Discussion in 'General Electronics Discussion' started by colum, Oct 29, 2016.

Thread Status:
Not open for further replies.
Scroll to continue with content
  1. colum

    colum

    102
    3
    Jul 25, 2013
    I find it odd that I posted a circuit requesting a pin out of a 741 Op Amp and not only did I not get a pin out but I got dragged into a long discussion about what I was going to do with this circuit and after threats to terminate the discussion apparently
    it was terminated.. I think this is ridiculous and the person that terminated this seems to be on a power trip.

    I still would like the pin out of a 741 OpAmp with out getting dragged into any discussions ....
    jeff
     
  2. CDRIVE

    CDRIVE Hauling 10' pipe on a Trek Shift3

    4,960
    648
    May 8, 2012
    I must have missed the memo. Did Google crash???

    Chris
     
    davenn likes this.
  3. davenn

    davenn Moderator

    13,585
    1,870
    Sep 5, 2009
    No power trip
    As i said we are all getting annoyed with ur lack of answering questions

    And ffs just google for a datasheet if that is all u needed

    Good grief how difficult is that
     
  4. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,387
    2,772
    Jan 21, 2010
    Yes, Dave was very much on a power trip. He's only interested in power.

    Mostly the apparently high (but unstated) power requirements you seemed to demand from the 741.

    Anything more than 18V (36V in unusual circumstances) at more than 10mA is going to be beyond its capabilities.

    Unfortunately, Dave's power trips also result from him not having the powers of clairvoyance. When asked a series of questions, you answered one and not the rest.

    I know, it's sad. You and I both have unerring clairvoyance, not to mention prescience and omniscience. It can be hard to put up with the demands of lesser mortals who lack not one, not two, but all three of these valuable life skills.

    For now you'll have to be content to answer the questions asked by mere mortals like Dave. Rest assured, if you do, and if you provide all the information he needs, he (or someone like him) will be able to come up with an answer,

    Naturally, I could give you the answer right now but you haven't prayed the right way.

    P.S. I use google too.
     
    davenn likes this.
  5. colum

    colum

    102
    3
    Jul 25, 2013
    While I am grateful to all who responded to my simple drawing and a request for the pin out of the 741 and I still did not get the pin out. I just feel that people have the best intentions but are not paying attention to the original request.
    I did not suggest Dave is on any kind of power trip or that he was the one that ended the discussion because I don't know Dave has helped me in the past and I appreciate his knowledge.
    I know enough about electricity to not stick my fingers in a fuse box and I know enough about electronics to listen to people like Dave.
    At this point I feel that I should end this thread folks are getting mad at me.
    Be well....Jeff
     
  6. davenn

    davenn Moderator

    13,585
    1,870
    Sep 5, 2009
    thread closed
     
    Arouse1973 likes this.
  7. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,387
    2,772
    Jan 21, 2010
    See this thread. The first post contains an image with the correct pinout.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day

-