Connect with us

7 Segment LCD Display

Discussion in 'Electronic Basics' started by [email protected], Mar 19, 2006.

Scroll to continue with content
  1. Guest

    Im using crocodile physics to simulate a circuit in which it counts up
    to 9 and displays it on a 7 segment display.

    I am using a BCD to seven segment decoder, but the outputs (a to g)
    always remain 1 regardless of how I connect it

    I would appreciate any help as I desperately want to finish it. I have
    uploaded my version of crocodile physics and my circuit for anyone who
    wants to have a look. Keep in mind that my vesion is very old (pre
    2000).

    Crocodile Physics:
    http://s44.yousendit.com/d.aspx?id=26EMMJKPQQ3FC2G7258U5V3D5T

    My Circuit:
    http://s64.yousendit.com/d.aspx?id=3I9X0PSWT83I11OUWT15S3QWU7

    please be speedy in your response

    thx
     
  2. Guest

    i got the decoder to work properly now. However, I have connected the
    decoder to the 7 segment display using decoders, but it doesnt light up
     
  3. Guest

    scratch that

    i got it to work
     
  4. Guest

    wait, it only counts uptil 8

    it isnt able to count 9
     
  5. ray13

    ray13 Guest

    You need to change that circuit file name. I can't open it. Make it a
    jpg or gif file.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-