Connect with us

7 segment driver

Discussion in 'Electronic Design' started by [email protected], Jun 3, 2008.

Scroll to continue with content
  1. Guest

    Is there a 7-segment LED driver IC that will do 0-F, preferably with a
    latch? Every chip I find is BCD and only does 0-9.

    TIA!
     
  2. Maxim, maybe.
    I've gone over to the STP16cp05 serial constant current led driver,
    quite nice, easy to drive once you get the look up table written


    martin
     
  3. I almost hate to say it, but it would be cheaper to use a PIC these
    days. $2 or less, after the (small) software NRE of course. Much
    better long term availability too.

    Dave.
     
  4. Guest

    And you could talk to them via i2c to boot. Looks like the route I'm
    going to end up taking, thanks!
     
  5. Rich Grise

    Rich Grise Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-