600 points audio analyseur

[vincent.thiernesse]

Hello,

I'm a French guy so my english is limited...

I've designed and build an audio analyseur.

see

http://cjoint.com/?jnuQ3MN7sa

http://cjoint.com/?jnu06pOjqA

It traces gain and phase of HP impedance and frequency response from 20Hz to
20 kHz using 600 steps (not limited to that).

OK, don't tell me that your sound card does as well, I know.

My question is: "on witch site could I publish this (open) projet".

For those who knows Elektor, it uses an R8C13.

Best regards

Vincent

 

[vincent.thiernesse]

Hum, sorry for crossposting...

 

[BobG]

My question is: "on witch site could I publish this (open) projet".

==============================================
If it has an Atmel AVR in it, post it on AVRfreaks.net. Your English
is several orders of magnitude better than my French. And my
Grandmother was from Paris.

 

[David L. Jones]

Hello,

I'm a French guy so my english is limited...

I've designed and build an audio analyseur.

see

http://cjoint.com/?jnuQ3MN7sa

http://cjoint.com/?jnu06pOjqA

It traces gain and phase of HP impedance and frequency response from 20Hz to
20 kHz using 600 steps (not limited to that).

OK, don't tell me that your sound card does as well, I know.

My question is: "on witch site could I publish this (open) projet".

For those who knows Elektor, it uses an R8C13.

Nice!
You could get that published in one of the mags like Elektor, and get
a bit of money back for your work.

Dave.

 

[vincent.thiernesse]

==============================================
If it has an Atmel AVR in it, post it on AVRfreaks.net. Your English
is several orders of magnitude better than my French. And my
Grandmother was from Paris.

No, It doesn't have an AVR. It has a R8C13 from renesas.

Have a nice day.

Vincent

 

[vincent.thiernesse]

Nice!
You could get that published in one of the mags like Elektor, and get
a bit of money back for your work.

Well, I tried to publish on Elektor. They only gave me 3000 caracters, not
an article but a 'readers mail'. It should give a link to an article on
internet, that's why I'm looking for a place to publish it on internet.

About money, I would earn 50 euros with my 3000 caracters. Nothing compared
to the investment...

Regards

Vincent

 

[Frank Buss]

Well, I tried to publish on Elektor. They only gave me 3000 caracters, not
an article but a 'readers mail'. It should give a link to an article on
internet, that's why I'm looking for a place to publish it on internet.

You could publish it on Sourceforge. It's free and they provide webspace
for every project, too.

Additional benefit: You could manage your files with the integrated version
system (including the web-directory, if you like), if you want to enhance
it or if more people want to work for it.

 

[BobG]

Sell it as a kit. Whats the block diagram? Is it a sweep frequency
sine wave, or an FFT?

 

[vincent.thiernesse]

You could publish it on Sourceforge. It's free and they provide webspace
for every project, too.

Additional benefit: You could manage your files with the integrated version
system (including the web-directory, if you like), if you want to enhance
it or if more people want to work for it.

This is a good idea !!!

Thank you.

Vincent

 

[vincent.thiernesse]

Sell it as a kit. Whats the block diagram? Is it a sweep frequency
sine wave, or an FFT?

This is a 600 steps of 0.1 db sweep frequency sine wave.

I need to improve a few points before thinking about a kit. The more
important point being the easyness of reproduction. Another is enhancing the
user interface.

I also wish to introduce Black-Nyquist diagram...but this is only a software
feature.

Regards

Vincent

PS: is your email valid ?