Connect with us

6 D cell battery holder

Discussion in 'Electronic Design' started by Brad Stone, Sep 24, 2003.

Scroll to continue with content
  1. Brad Stone

    Brad Stone Guest

    Hey everyone,

    I could probably solder up something on my own, but I was hoping to
    find a particular battery holder already built.

    I need a battery holder that holds 6 D cell batteries (9 volts) *and*
    that has a 9 volt type snap connector. I have found some battery
    holders that hold 6 D cell batteries but they either have a "large snap"
    connector or solder lugs. I really need a 9 volt type snap connector.
    I've looked at a lot of electronic websites and I'm begining to think
    that such a beast does not exist :)

    Thanks for any help,
    Brad
     
  2. TCS

    TCS Guest

    Find somebody who knows how to solder.
     
  3. http://www.batteryholders.com/BH36DSF.shtml

    Good luck finding them in stock, though.

    Best regards,
    Spehro Pefhany
     
  4. Active8

    Active8 Guest

    sci.electronics.components
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-