Connect with us

.5-600 MHz AD8343 vs LT5512

Discussion in 'Electronic Design' started by [email protected], May 23, 2007.

Scroll to continue with content
  1. Guest

    I'm working on a homebrewed receiver and am looking at using either
    the
    AD8343 or LT5512 as the mixer. They seem very similar in
    capabilities.
    The AD8343 appears to have slightly better LO to IF port isolation but
    a more complication input biasing.

    What the tradeoffs of using the AD8343 vs LT5512 for converting
    ..5-600 MHz RF to 140 MHz IF?

    -- John
    -------------------------------------------------------------------------
    | Feith Systems | Voice: 1-215-646-8000 | Email:
    |
    | John Wehle | Fax: 1-215-540-5495
    | |
    -------------------------------------------------------------------------
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-