Connect with us

45-degree diagonal cutters?

Discussion in 'Electrical Engineering' started by DaveC, Feb 10, 2010.

Scroll to continue with content
  1. krw

    krw Guest

    Wow! A seven-bager, Michael. Good going!
     
  2. What the **** are you talking about, asswipe?

    I never wired ANY house.

    I did post wire, not that a fucking retard like you knows what that is.
    I popped and dropped 35 holes a day at one time with a two man crew, you
    stupid ditz. **** a bunch of single dwelling installs. I did high
    rises.

    So **** off and die, as usual, asshole.
    I never had to deal with any customer equipment during that job.

    And sorry, asswipe, but link modulators and downconverters, etc, etc,
    etc, etc, etc. Are OUR products, you stupid ****. We do integrate
    several other firms' products and make the commerce in this nation far
    greater than you ever did, but that is another story that is over your
    fucking head.
    No. A system integrator is a low level operation.

    I engineer the integration of the system, and spec out the entire
    design and pick out the cabinets and choose the backend elements. Only
    about three orders of magnitude more bandwidth than you ever dealt with
    and the sophistication is far greater as well.

    All the crying in the world that spews out of your face will not change
    that fact.

    Yet more elements of modern engineering that is beyond your grasp, ya
    mouthy punk bitch.
    Yeah, ol' Mikey never once bought into a bad deal. He is above and
    beyond all reproach when compared to the rest of the world. Not one
    error in his entire life. No matter how pathetic what you devolved into
    has turned out to be.
     
  3. You lost the argument. Folks do not get to operate in such places
    without extreme vetting.
    I do not need to prove anything, asshole.
    I do not need to lie anywhere in life, asshole.
    You do not know what no one believes. It is, in fact, impossible.
    Your basic flaw shines through. The gang boy retard mentality is
    noted, and the further stain it places on your character makes it easy to
    see that you have mental issues.
     

  4. I wonder what it would be like to pull an "Iz it zafe?" scenario on this
    filthy, retarded bastard.
     

  5. My last six pack of Sam Adams' Boston Lager lasted more than two
    months, and I finished the last one three weeks ago, and gave one of them
    away to a guest. That is the amount of drinking I do.

    So, if cancer does not take me like it has so many in my family, I will
    live until after 2030.

    You will not. Ha Ha fucking HA, motherfucker. Put THAT in your
    fucking pipe and smoke it.
     
  6. Then you lose, as your argument began with you jacking off at the mouth
    about testing cutters' efficacy with piano wire.

    Goodbye, chump.
     

  7. I am not familiar with the shops you mention, nor am I familiar with the
    cutters you mention or claim that I am fond of, you goddamned dumb ****
    liar, since I have been talking about Lindstrom cutters, which beat
    anything you have.
     

  8. I did. You obviously did not.
     

  9. I also know more about stainless steel than you ever will as well. My
    first job out of high school was polishing stainless plates 2 inches
    thick that got rolled up into huge food processing tanks. We did a lot
    of exotics as well.

    I do not expect a ditz that thinks steel wire is the right test for
    side cutter efficacy to know what surface quality is about though, much
    less alloy composition.
     

  10. I also know more about stainless steel than you ever will as well. My
    first job out of high school was polishing stainless plates 2 inches
    thick that got rolled up into huge food processing tanks. We did a lot
    of exotics as well.

    I do not expect a ditz that thinks steel wire is the right test for
    side cutter efficacy to know what surface quality is about though, much
    less alloy composition.
     

  11. Grow up, dumbfuck.
     

  12. You are behind the times. Plain and simple.
     
  13. krw

    krw Guest

    But there isn't much pressure in a vacuum.
     
  14. No, it is NOT. It is the test for SOME types of side cutter. Other
    types of even the highest quality side cutters are NOT EVER tested in
    such a manner.

    Think of taking your best pocket knife or hunting knife blade edge, and
    press it against hard steel, and you'll **** it up. Some side cutter
    types are not the pincer action you seem to have hard wired into your wee
    brain. The CUT through SOFT media. So you lost, asswipe. That is all
    there is to it.
     

  15. You're a goddamned retard.
     

  16. It appears that the uneducated retard only thinks of one meaning when
    the term "polish" is used. We receive huge quantities of a customer's
    stainless of various types, and we ABRASIVELY polish them to customer
    spec. It is not some dope like you wiping a stainless countertop.

    You are unskilled. You are unlearned, and YOU are a fucking dolt.

    Most dumbfucks flip burgers while they are in college. I think that my
    "unskilled position" as you call it, garnered me far more knowledge about
    the real industrial world than any burger flip or pizza boy job ever
    could.

    You are only about as stupid as it gets, fucker.
     
  17. I know more about stainless steel and other metals than you ever will.
     
  18. **** off. No 'please' required.

    Just look at fucking flush cutters, asshole. Not a pincer action, It
    CUTs soft media, and is NEVER meant for steel EVER, and is NEVER tested
    using steel EVER either.

    So **** off, asswipe. **** off and DIE!
     

  19. You are wrong, David. Face it, fucktard. You got it wrong, and you
    are wrong. Period. There are several classes of side cutter that do not
    ever get tested in the manner you describe. The fact that you are
    oblivious to this detail proves that you are a pussified troll wanna be
    at best. Either that, or you really are that stupid. You decide, Mr.
    Two Tone Twit.
     
  20. So, what is it, dumbfuck? You have no clue about fucking side cutters
    too?

    "Sociopathic"? You're a goddamned idiot too, boy.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-