Connect with us

433 MHz position reporting

Discussion in 'Hobby Electronics' started by Andrew Rich, Apr 15, 2007.

Scroll to continue with content
  1. Andrew Rich

    Andrew Rich Guest

    One thing I have been meaning to do for ages is pass positon data over 433

    I got a PIC, 433 TX and RX from JAYCAR and got it working.

    Only goes up to around 1200 baud, but quiet a good result. 002.jpg
  2. Poxy

    Poxy Guest

    That's a pretty impressive operating range!
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day