Connect with us

40 Watt Fm Amplifier

Discussion in 'General Electronics Discussion' started by ntiwari, Aug 12, 2012.

Scroll to continue with content
  1. ntiwari


    Aug 12, 2012
    Hey guys,
    I wanted to build an fm amplifier (40 watts), but wondered if I could use unleaded parts. I was also wondering what would be the best board to put this on, I was thinking one of those radio shack copper boards.
    Sorry I know this may sound kind of stupid to some of you but thanks for helping
    Schematic and parts list in linkhttp://
  2. davenn

    davenn Moderator

    Sep 5, 2009
    hi ntiwari,
    welcome to the forums
    apart from the legalities of this project .... for that power level you must have a station licence!

    you can use surface mount components. the project must be built on etched PCB
    You CANNOT use any form of perfboard
    the datasheet for the device is likely to show a proper PCB etch pattern

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day