Maker Pro
Maker Pro

4-pin resistive touch screen

warover

Mar 9, 2014
1
Joined
Mar 9, 2014
Messages
1
hello
I have troubles with one touch screen which runs on a meter in my lab basically it is unresponsive to touch.I removed it from the meter and measure the resistance in all combinations of the 4-pins taking every time infinite measurement .The screen have a written inscription saying YMM100 5.6" and i can not find anything about it with that number.I would be grateful if anyone could help my finding the correct replacement part.The panel has an outer dimension of 139mm*110mm and effective is 115mm*85mm and runs on a Hitachi sp14q006-t
best
Nikos
 
Top