Maker Pro
Maker Pro

31 pin straight connector; Piezo Controller; LabVIEW

EEE888

Oct 24, 2013
1
Joined
Oct 24, 2013
Messages
1
I got a piezo controller board, and want to program it through LabVIEW

The communicate port of the board is a 31 pin straight connector.

pin 8 is GND
pin 9 is +15
pin 10 is -15

I want to charge the board. How to do it? Could I charge the board via USB of PC?

pin 16 is display output:um, selectable via DIP switch
pin 20 control signal input
pin 21 control signal output
pin 26 status overflow
pin 28 VC/EC

And I need to connect pin 16,20,21,26,28 with PC. How I do?

Thanks for your help
 

Attachments

  • DSC_0049.jpg
    DSC_0049.jpg
    106.1 KB · Views: 162
  • DSC_0045.jpg
    DSC_0045.jpg
    156.2 KB · Views: 158
Top