Connect with us

2n3896 mounting

Reply to Thread

Discussion in 'Datasheets, Manuals and Component Identification' started by krawczuk, Sep 11, 2012.

Scroll to continue with content
  1. Sep 11, 2012 #1
    krawczuk

    krawczuk

    10
    0
    Mar 20, 2011
    hi, i`m making a car battery charger with a 2n3896 scr . does the scr have to be insulated from the case ? i was thinking of bolting it straight on the case for the heatsink .the negative charging lead is connected to the anode and rest of the circuit.


    mark k
     
  2. Sep 16, 2012 #2
    davenn

    davenn Moderator

    13,901
    1,971
    Sep 5, 2009
    Hi Mark,

    sorry for a late response, I missed this post earlier
    wonder if you got any info in the mean time.

    looking at the datasheet the stud mount is one of the active connections so will have to be isolated from the case. .... unless of course your case is isolated from either power earth or DC negative rail

    the data sheet shows the next range of devices in that series where the stud mount is isolated

    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PLCC socket best suited for having PCB mounting above it

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-