Maker Pro
Maker Pro

27" Sylvania tv/vcr combo model:6325CCA

S

Sidney

Jan 1, 1970
0
27" Sylvania tv/vcr combo model:6325CCA,year:Aug 2000,UL listed:31Ya
(Funai/Symphonic)purchased from Canadian Tire (like
Wall-Mart),apperently the customer thought he could save himself some
money and decided to go in and mess with many things including the
timing of the cam gae which in this chassis is located on the bottom
of the vcr I aligned the arrows with each other but the smaller plate
gear above the cam gear is still out of alignment,I also cleaned the
mode switch.I need a schematic diagram for the mechanical section
dealing with timing for the cam gear in eject mode.
This tv has two boards,when looking at the back of the tv the power
supply board is on the left and the vcr is on the right,here are some
part #'s of common parts which may familiarize you with this chassis:

Flyback # BSC-25-2094S also LTF00CPS2007 (location:T571)
Yoke # DSE-2603BL (Samsung)
CRT type: Funai

Note:I looked at this site for a schematic or other makes of cheap
disposable tv's that share this chassis but found none:

http://www.schematicsforfree.com/video/video.html
http://www.schematicsforfree.com/video/funai_products_cross_reference_1997.pdf

If anyone has a schematic for the cam timing could you post the link
or e-mail it to me:

E-mail:[email protected]

Sidney
Dartmouth,Nova Scotia
Canada
 
Top