Connect with us

27" RCA dead.

Discussion in 'Electronic Repair' started by Dani, Aug 28, 2007.

Scroll to continue with content
  1. Dani

    Dani Guest

    Model # 27R430T (YX1), Chassis # ITC008FAR, dead, nothing shorted, or
    leaky, all standby voltages are ok, plug unit in, & just relay click
    for degaussing. No start up, or High Voltage.
    Could the tact switches be leaky? It has a front panel board with the
    IR sensor, & the tact switches on it. Dani.
  2. Art

    Art Guest

    You will need to get a bit deeper into the device, checking the voltages at
    the Eprom and MPU to determine if the Data or Clock lines are being loaded
    down. Will definately need a good schematic of the circuit to start tracing
    the associated lines to the other probable devices.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day