Maker Pro
Maker Pro

2532 EPROM to 2732 EPROM

S

Steve Lewinsky

Jan 1, 1970
0
I am trying to insert a 2732 EPROM into a location where a 2532 currently
should exist. I have programmed a 2732 EPROM with the appropriate code. I am
sure that I can install this with a few pins changed, but I can't seem to
get it right.
Here is what I did
All the pins are identical except the following:
2532 socket. 2732 EPROM
pin 18 ---------> 21
pin 20 ---------> 18
pin 21 ---------> 20

Has anyone done this type of adapter?
 
B

Brian Gregory [UK]

Jan 1, 1970
0
Steve Lewinsky said:
I am trying to insert a 2732 EPROM into a location where a 2532 currently
should exist. I have programmed a 2732 EPROM with the appropriate code. I
am sure that I can install this with a few pins changed, but I can't seem
to get it right.
Here is what I did
All the pins are identical except the following:
2532 socket. 2732 EPROM
pin 18 ---------> 21
pin 20 ---------> 18
pin 21 ---------> 20

Has anyone done this type of adapter?


This is what think you need:

2532 socket 2732 EPROM

21 (VPP)-----------not used
20 (/CE) ---------------------------- 18 (/CE)
18 (A11) ---------------------------- 21 (A11)
GND 0V ----------- 20 (/OE)

Obviously you can use pin 12 for GND 0V.
 
Top