Connect with us

25" Sanyo tv

Discussion in 'Electronic Repair' started by joe, Nov 20, 2005.

Scroll to continue with content
  1. joe

    joe Guest

    I have a Sanyo 25PN1 TV "Modal C25EG77NE" Chassis EB4-A25
    When I power it up the standby LED comes on, but when I press the
    channel change buttons or use the remote the LED flashes. I have
    replaced R621 as it was O/C.
    Can any help

    Joe
     
  2. Skype_man

    Skype_man Guest

    I had one with a bad flyback, came on, shut right down,
    with some high voltage. Check B+ @ horiz output, the
    drive, & regulated B+. With no info from you, it's hard
    to help you. The led lights because the 5 volt lin, & possibly
    other standby voltages are there. Sky.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-