Connect with us

16500C hard-disk failure

Discussion in 'Electronic Equipment' started by [email protected], May 6, 2007.

Scroll to continue with content
  1. Guest

    I have an old 16500C with 2GHz dual oscope card and 100/500 Logic
    analyzer card. Recently, the hard disk in the analyzer failed. I
    have all the original 3-1/2 disks which include all the SYS files.
    Problem is I can either boot with oscope SYS or LA sys since both
    won't fit on one 3-1/2 disk.

    Does anyboy have a solution for this? I have take the failed hard-
    disk out but I have no clue how to build a new one with all the system
    on it. Is it possible for somebody to post binary image of a good
    16500C hard-disk? Thank you for your time and suggestions in advance.
     
  2. Jamie

    Jamie Guest

    well, get your self a new HD, install it, your disk or the bios in the
    analyzer should have a HD setup procedure. look at your manual.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-