Connect with us

1407 Revision 5 - Remote arm/disarm module.

Discussion in 'General Electronics Discussion' started by Sparks_21, Feb 22, 2011.

Scroll to continue with content
  1. Sparks_21

    Sparks_21

    17
    0
    Dec 3, 2010
    Hi everyone,

    I am currently working on a home security system.

    I have it about 90% complete, but i want to add the ability to arm and disarm the alarm by phoning a house phone number and entering a 4 digit code.

    Now i have bough a module called - Eagle 1407 Revision 5 - Remote arm/disarm module.

    I have this datasheet -

    http://eaglealarmverification.com/E...07 Remote Access Module with Voice Manual.pdf

    all i want to do is ring the module and then its switches a relay.


    I was wondering if any of you have any idea how i should go about wiring it up.

    here is the wiring diagram also shown in the datasheet - ( attached )

    i wonder if im going in the wrong direction by using this module.......


    Thanks in advance for any replies.
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-