Connect with us

12v heating element dimmer

Discussion in 'General Electronics Discussion' started by Andi lycett, Feb 17, 2017.

  1. Andi lycett

    Andi lycett

    4
    0
    Feb 17, 2017
    Hello hive mind,

    I have an electric towel warmer that is 12v and when measured without a dimmer inline is drawing 3amps.

    The warmer is a little to hot and I would like to introduce a dimmer onto it, I have a 240v dimmable transformer and added a normal 240v household lighting dimmer before that. But now I keep blowing the transformer, I also tried a 12v dimmer the other side of the transformer and it was if the dimmer wasn't in line it didn't do anything.

    Does anyone know what I am doing wrong ? Sorry for the vague explanation

    Andi
     
  2. duke37

    duke37

    5,254
    726
    Jan 9, 2011
    Please give details of what you have and how they are connected. Pictures are very useful.
    12V at 3A is very small for a heater.
    230V at 3A is very large so not likely to be what you have.
    Phase angle dimmers can have problems feeding transformers.
     
  3. Minder

    Minder

    2,876
    596
    Apr 24, 2015
    I made a hot wire foam cutter using a Triac controller on the secondary, although many have used a dimmer on the primary, Did you put the dimmer together yourself or an off the shelf version?
    M.
     
  4. Andi lycett

    Andi lycett

    4
    0
    Feb 17, 2017
    I just used a standard lighting dimmer that you would use in the house.

    Do you have a link to the triac ?

    Cheers

    Andi
     
  5. Minder

    Minder

    2,876
    596
    Apr 24, 2015
    If the towel warmer just involves a element only, then one avenue would be to look for a Wall Wart that is either 12vDC at least 5amp and obtain one of the $5.00 PWM controllers off ebay.
    If the wall wart is ~9v AC then you could put a bridge with a 470uf cap on the output for a PWM controller use.
    That transformer you show does not appear suitable for the application.
    This is as long as the warmer does not have any inductive devices in it.
    M.
     
  6. duke37

    duke37

    5,254
    726
    Jan 9, 2011
    In a bathroom there are strict regulations about the wiring. As far as I am aware, the only device which is legal is a shaver socket which has an isolating transformer. Lights must be switched with a cord. Others will know the regulations better than me.
     
  7. Andi lycett

    Andi lycett

    4
    0
    Feb 17, 2017

    Sorry for being a simpleton, do you have a link to the pwm controller, the only one I could find in the UK is £50 and there's lots of types
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-