Italians with groups like this on their local ones
like it.hobby.elettronica
use interesting program to draw & see schematics for posting
in text only usenet IMHO much bettter than ASCII ...
its FidoCAD (maybe someone could write to the author to make an
English interface & help file for it). Can be found here: less than
1Mb installed:
http://www.enetsystems.com/~lorenzo/fidocad_win.asp
you draw a standard schematic, export it as text & paste it into a
message like this (pasted code) interesting oscillator:
[FIDOCAD]
MC 85 45 0 0 580
MC 70 45 1 0 170 [snip]
TY 115 25 5 3 0 0 0 * 100n
TY 155 45 5 3 0 0 0 * 34kHz
TY 75 35 5 3 0 0 0 * LM6181
You to see it with that installed program, just copy that upper
complete code, open the program, from menu open:
modifica/incolla/come nuovo documento .... & so you see the
schematics like usuall one; IMHO not a bad trick ... & easier than
ASCII pics schematics ...
Try it 4 fun ...
