Maker Pro
Login Join Maker Pro
Or sign in with

Menu

Connect With Us

Network

Search results

  1. M

    Help with two wires please

    Update. The manufacturers were useless and wouldn’t release any info on which way the wires went. I decided that the right side of the board was a red positive which went through the led so decided it needed the neutral on the exiting side. It’s all working again now, Big thanks to Externet...
  2. M

    Help with two wires please

    I’m afraid I failed to read any numbers, this is as close as I could get, even with a magnifying glass.
  3. M

    Help with two wires please

    The blue is a negative as it says on the main board connector in the picture. I will have a very close look later to see what’s written in the cathode. Thank you so much for your help
  4. M

    Help with two wires please

    The battery goes to a separate part of the board.
  5. M

    Help with two wires please

    The two wires that have pulled out are pins 1 and 5 in the plug.
  6. M

    Help with two wires please

    Thank you. I’ve asked the manufacturer for clarification on where the wires go, can’t imagine they’ll be that forthcoming but I’ll go from there.
  7. M

    Help with two wires please

    I can’t seem to post more pics but from the right the wires are yellow, blank, blank, green, red. where the blanks are either blue or red
  8. M

    Help with two wires please

    So I managed to pull two wires out of a night vision push button on/off with three stage light IR dimmer. I know the blue is neutral but which hole does it belong and which hole does the red wire belong. Thanks for any help, it’s very frustrating and I don’t want to guess.
Top