Maker Pro
Login Join Maker Pro
Or sign in with

Menu

Connect With Us

Network

Search results

  1. C

    12V inverter circuit wanted

    I need something to convert 12 volts dc to 120 ac and can handle more than 1300 watts that dont cost a lot to build i know you can buy pre built but money is low
  2. C

    please help me build a circuit

    thanks for all the info.
  3. C

    please help me build a circuit

    did u look at the web site u told me about all about circuits (tank circuit) using my 1000 ohm transformer instead of that 1 where 2 put the LEDs & resistors 2 make it work right & do u know how much resistance the diff color have i know it will not be much but i will need 2 know total...
  4. C

    please help me build a circuit

    they are 2 diff. transformers, if you look at the tank circuit at allaboutcircuits.com just add the LEDs & resistors my ? is will the 1000 ohm transformer work as the inductor if so what cap will balance the circuit where to put the LEDs & resistors & what polarity 470 is the bigges cap i have
  5. C

    please help me build a circuit

    maybe another ball game i looked it up in the manual and its a transformer it consists of two coils of wire wound around a form made from thin plates of iron a signal flowing through one coil is induced into the second coil circuts that cannot connected directly to the speaker (built inthe kit)...
  6. C

    please help me build a circuit

    if you could see this kit you would see the inductor is built in and a spring connector on each end labled 1000 ohms the capactor has to balance the inductor & support the resistors & LED's this all i can tell you iam doing the best i can idont what else to tell you if i cant find this out i...
  7. C

    please help me build a circuit

    ok it is not in manual, henrys kit has it in ohm,s when capactor discharges it charges the inductor cut power the magnetic field collapes & reverses polarity & charges the capactor backinforth the resistors are for the LEDs & the LEDs show the current flow backinforth thanks & i said i was...
  8. C

    please help me build a circuit

    Iam using a radio shack kit model#28-278 . Usins the 1000 ohms inductor & 2 220 resistors & 2 leds. What size capacitor will i need balance to the circuit out ? Iam using a 10 volt dc power source if that makes a diff. I really could use all the help i can get thanks
  9. C

    tank circuit

    9 volt battery or a 10 volt dc power supply the LED's so you can see the flow back in forht
  10. C

    tank circuit

    Hi Iam new to electronics and need to know how to build a 6 componant ,10v tank circuit on a breadboard I know it has 2 l e d & a resistor & a capacitor &a coil. what eles & how do you build it? thanks cuda65
Top