Connect with us

Sensors block

  • Hi all,

    This is an H202/humidity/temperature sensors block I have designed.
    All componants are located inside the block cavities and are protected from the gas.

    The PVC block CAO was done with my PCB CAD package by stacking 5 various
    width PCB exported in STEP format.

    The board also contains batteries backing up potentiostat circuit to avoid sensor warm-up issues
    and a gas Sensor aging test function.

    Olivier Schrevens
    www.realizer.be

    upload_2014-6-26_14-4-54.png

    upload_2014-6-26_14-7-36.png

    upload_2014-6-26_14-9-46.png

    upload_2014-6-26_14-14-35.png
nathan hawks likes this.
Electronics Point Logo
Continue to site
Quote of the day

-