Connect with us

Project Logs

Showcase your projects in here by creating a dedicated entry, which automatically creates a discussion thread.

  1. Meccano robot

    I saved up for ages to build an expensive project, this is the project I chose. The robot is of completely original design and is an ongoing...
    Views:
    2K
    Likes:
    2
  2. PIC Programmer Made From USB Keyboard

    Following on from this thread in the microcontrollers section, I've started my actual build. The keyboard was a cheap £6 one from the...
    Views:
    2K
    Likes:
    0
  3. Build a device from a Schematic (Production PC board)

    I will be using Eagle PCB software (the freeware version) because that seems to be used by a lot of hobbyists, and it can produce the files needed...
    Views:
    2K
    Likes:
    4
  4. Build a device from a schematic (DIY PC board)

    I will use ExpressPCB's free software to design the PC board. This is proprietary software from a PCB manufacturer that I have used. The software...
    Views:
    2K
    Likes:
    0
  5. Toner transfer for PCBs having BGA packages on them

    OK, I'm a glutton for punishment. Quite some time ago I purchased some small chips designed to drive a couple of LEDs at a constant...
    Views:
    2K
    Likes:
    5
  6. Sous Vide cooker, elasticity, and meat

    As part of something I'm doing elsewhere I have made a Sous Vide cooker, designed and made a force-displacement device for measuring elastic...
    Views:
    2K
    Likes:
    2
  7. DO-160 Section 22, Lightning Induced Transient Susceptibility Test Project

    I just spent about an hour and a half writing a nice long log of what I have done with pictures and lists of equipment. I hit spell check because...
    Views:
    1K
    Likes:
    0
  8. Views:
    1K
    Likes:
    0
  9. Making My First Digital Thermometer for Less Than $30

    These directions will show you how to make a simple digital thermometer for less than $30 using a few electronics and three (3) ICs.
    Views:
    4K
    Likes:
    1
  10. "notsohot" project - mains power cycler for heating appliances

    My "notsohot" project will enable a heating device to be cycled on and off with a duty cycle adjustable from <5% to >95%, and a cycle time of...
    Views:
    1K
    Likes:
    1
  11. High(ish) power passive dummy load

    Used as a dummy load to test a Keithley 228 Voltage Current source
    Views:
    1K
    Likes:
    1
  12. Robot Sumo Project - PICAXE

    Sumo Robot, complete with schematics and code
    Views:
    1K
    Likes:
    1
  13. Photography Xenon Studio Flash Unit

    200ws high power xenon studio flash strobe
    Views:
    1K
    Likes:
    0
  14. Auto-resonant Acoustic Guitar Amplifier

    Take a guitar amplifier but instead of a speaker, use a surface transducer to resonate the body of an acoustic guitar.
    Views:
    962
    Likes:
    0
  15. My module psu design

    Linear PSU based on a single LM78S12CV voltage regulator
    Views:
    956
    Likes:
    1
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-