Maker Pro
Login Join Maker Pro
Or sign in with

Menu

Connect With Us

Network

Recent content by T R

  1. T

    Newbie help please- Omron relay

    Solved! ... And it was not a bad relay. The PCB trace near the relay was burned open. I repaired the trace with a short piece of wire and now my oven's broiler works again.
  2. T

    Newbie help please- Omron relay

    Hi ETR, I haven’t done my repair yet, because it requires completely removing and taking apart the oven and the lady who owns it won’t let anyone touch it until the holidays are over. I expect to begin looking into it within a week or so. My guess is that the relay is okay but the traces...
  3. T

    Newbie help please- Omron relay

    Hi Minder, Thanks for the input. You are right that the foil may be burned off, and possibly the relay may not be damaged -- I haven't actually removed the board and inspected the back side yet because the oven's being used a lot these holidays! But I will, and do have solder wick and am good...
  4. T

    Newbie help please- Omron relay

    Great Edd, thanks! Now I have finally also found a datasheet showing the coil resistance vs. voltage at http://www.omronkft.hu/pdf_en/g8p.pdf I'll be able to determine the rated voltage by measuring the coil with an ohmmeter as you suggest. So though still unable to find the correct...
  5. T

    Newbie help please- Omron relay

    Hi de Edd, Thanks for the feedback. Yes that relay you refer to on Amazon is physically the same, and has the same AC contact ratings, as mine that I need to replace, but I don't know the DC voltage of mine. Can you determine what my Omron G8P-UA-006206 coil voltage is? 73s (Best regards) to...
  6. T

    Newbie help please- Omron relay

    I also need one for my appliance ... Could you please tell me what is the modern replacement part number for the Omron G8P-UA-006206 PCB Mount relay? Or perhaps, what is the coil voltage for the Omron G8P-UA-006206? Thank you :-)
See more
Top