Maker Pro
Login Join Maker Pro
Or sign in with

Menu

Connect With Us

Network

Recent content by midsomerdave

  1. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    Ok, on 3 pin locking plugs, as you look into the socket on the machine itself the earth (green?) wire goes to the right hand pin. This is assuming its laid out with the largest space between the pins at the bottom. The two other wires don't matter....either way round will work.
  2. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    T This is a good place for info too: http://bama.edebris.com/manuals/weller/
  3. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    Do you mean the 'locking' DIN type or the Bulgin one Ryan?
  4. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    The connector in your pics isn't the same as the one on the picture of the Weller.
  5. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    No problem....get them from the same places. You need T 3437 000....go to page 30 of the PDF I sent you. Farnell have it..: http://uk.farnell.com/amphenol-tuchel/t-3437-000/socket-panel-7way/dp/1123523
  6. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    Amazon: http://www.amazon.com/AMPHENOL-TUCHEL-3434-PLUG-FREE/dp/B011NNOO0Y
  7. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    or here: http://www.rapidonline.com/Cables-Connectors/Amphenol-T-3434-501C091-B-Male-DIN-7-Pin-Cable-Connector-Bayonet-Locking-50-1420
  8. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    https://uk.farnell.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=15001&langId=44&storeId=10151&krypto=zPjbjpKMJEA52BP7z7R%2F7pUvkycj271uyHHXfyXNbmEHB5WvnG1kLksHX67MLA05zkcaqWqChSy2%0AvjeZ5VeXJlYBFYX3zO2%2B&ddkey=http:Logoff
  9. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    go here....price is plus VAT: https://uk.farnell.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=15001&langId=44&storeId=10151&krypto=zPjbjpKMJEA52BP7z7R%2F7pUvkycj271uyHHXfyXNbmEHB5WvnG1kLksHX67MLA05zkcaqWqChSy2%0AvjeZ5VeXJlYBFYX3zO2%2B&ddkey=http:Logoff
  10. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    T 3434 501 is the part no. for the one with silver contacts, T3434 518 for gold, 4-6mm cable.(C091B range) Page 20 on this PDF link: http://www.digikey.co.uk/Web%20Export/Supplier%20Content/AmphenolTuchel_361/PDF/amphenol-c091-abd.pdf?redirected=1
  11. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    Ah, I see the problem.....they haven't got the 7 pin. By the way....are you looking for the plug....or socket?
  12. midsomerdave

    Plug on Weller WTCP 50 soldering station?

    Hi taka, Farnell, CPC and RS all do that connector. Look under 'locking DIN' if you want something reasonable....or the replacement is made by Amphenol but madly expensive!.Come back to me if you're still unsure.
  13. midsomerdave

    Identifying a Weller iron.

    Hi, Does anyone know the difference between Weller 24V irons TCP, TCP-1 and TCP S? Is it as simple as TCP = 45W, TCP-1 = 45W but black handle and TCP S = 50W? I'd appreciate it if someone could clarify this for me. Thanks, Dave.
  14. midsomerdave

    Wanted: Weller soldering iron cable.

    Hi, Does anyone know where I can get (or what it's called/part no.) the silicon cable used on Weller's 24V irons please? I don't just want a replacement....I want about 20M Thanks, Dave.
  15. midsomerdave

    Advice please.

    John, you're a gem! No, I didn't know that....I assumed it was the same as in Europe (not the UK) where orientation isn't an issue. Thanks...again. Dave.
See more
Top