Electronics Forums

Electronics Forums > Newsgroups > Electronics Newsgroups > Electronic Repair > FA: 1lb PLUS OF VARIOUS NEW TRANSISTORS SOME JAN>SO MANY:-)

Reply
Thread Tools Display Modes

FA: 1lb PLUS OF VARIOUS NEW TRANSISTORS SOME JAN>SO MANY:-)

 
 
Jonathan Kirwan
Guest
Posts: n/a
 
      09-30-2006, 08:32 PM
On Sat, 30 Sep 2006 19:13:17 GMT, "Homer J Simpson"
<(E-Mail Removed)> wrote:

>"Jonathan Kirwan" <(E-Mail Removed)> wrote in message
>news:(E-Mail Removed).. .
>
>> I once packed a box containing a monitor and keyboard to be shipped
>> ahead of me (I was flying) via UPS to a destination cross-country. I
>> had packed it using shaped foam that was at least 8 inches thick on
>> all sides and bottom and there was almost no possibility of inner
>> movement of either the monitor or keyboard. When I picked up the box
>> there was a nice hole with some 5" diameter dead-center on one of the
>> faces. On opening the box I found the keyboard had been demolished
>> but the monitor survived.
>>
>> On closer look, it had the rough appearance of a sharp, conical
>> penetration. It was definitely NOT blunt damage. I then began to
>> imagine the idea that UPS keeps a steel cone mounted on their cement
>> factory floors, just for the occasional frustrated WHACK their
>> employees sometimes need to do to a box.
>>
>> I really couldn't have anticipated this kind of penetration. It was
>> sharp, narrow, deep, and had enough of an impact to press through a
>> lot of foam and to then still break through the keyboard.

>
>Fork lift tines?


Yes, that had crossed my mind. However, it was a conical penetration
that had a roughly circular external presentation. I suppose it is
possible that's what their tines looked like. But it didn't match
tines I've seen before.

Jon
 
Reply With Quote
 
 
 
 
Charlie Edmondson
Guest
Posts: n/a
 
      10-02-2006, 04:55 PM
Spamfree wrote:

> "Lostgallifreyan" <no-(E-Mail Removed)> wrote in message
> news:Xns984ECBDCBB83zoodlewurdle@140.99.99.130...
>
>>"Spamfree" <(E-Mail Removed)> wrote in
>>news:451eb341$0$25783$(E-Mail Removed) t:
>>
>>
>>>Again, it isn't rocket science, but many have yet to master it.

>>
>>Actually, packaging IS complex. To optimise it fully takes as much command
>>of physics and calculation of likely operating conditions as electronics!
>>(Commercial hauliers put a lot of R+D into packing, as do makers of
>>expensive equipment).
>>
>>What makes it easier is two things: the cheapness of overengineering for
>>safety, and our more easy tangible grasp of the facts. A limited number of
>>stock items also makes choices easy.
>>
>>If you know what you're buying, you can always specify packaging to the
>>seller. I bought a second-hand hard drive and knowing the tendency for
>>some
>>people to use layers of newspaper for fragile stuff, and knowing how dense
>>and incompressible that stuff is unless you take lots of time to form
>>crumple zones, I asked the seller instead to just get a larger box, I
>>don't
>>care how rough it is, and to put all the shitty scrag ends of bublewrap
>>he'd not want to indignify anyone elses parcel with around that drive. He
>>didn't have to think, he was happy to shove all the crap that would fit
>>round it, and it arrived in perfect order.
>>
>>Another time I wanted three HeNe laser tubes. I made the box and lined it
>>myself and put rolls of paper where the tubes should go, sent it to the
>>seller, said replace paper with glass, send it back. Again, it worked
>>perfectly, and it's always worth specifying somehow, if you know the
>>product better than the seller does. This is almost always the case when
>>buying electronics or optics parts from eBay surplus suppliers.
>>
>>That won't work for full-on commercial sellers but they've (hopefully) got
>>decent arrangements made. It's works great for private sellers though, who
>>usually have the remains of packaging from private buying.

>
>
> While you "could" be right about the calculations, R&D - etc of "bigger"
> places, I think the gist of this is for "small" businesses (mom and pop) AND
> individual sellers - the e-bay and newsgroups buying crowds. THEY don't use
> high tech or high priced packaging. If you "pack" it securely - as you would
> want to "receive" it - chances are you'll do a good job. Simply "throwing"
> something into a box - adding some newspaper or peanuts and not "securing"
> the item or cushioinng it - is half assed. Yes, it does take "some" effort
> to pack - but again - it isn't "impossible" to get the hang of!
>
> Fed Ex doesn't pick up (packages) near me - the closest place I know of, is
> their terminal - 40 miles away. So, I use UPS and USPS. I've had a decent
> record so far sending and receiving.
>
>
>

My favorite shipping fiasco came from drugstore.com. My wife ordered
some stuff, including a couple of Christmas presents from them last
year. Among the items she purchaed was a bottle of liquid chlorphyll,
which she likes to drink for here digestion.

They shipped it in their usual big box, with NO padding! Of course, the
glass bottle of chlorphyll was smashed, which stained everything in the
box, plus probably everything it came in contact with in the mail, a
bright green! The post office was not happy with that one!

Charlie
 
Reply With Quote
 
Tim Williams
Guest
Posts: n/a
 
      10-02-2006, 06:14 PM
"Spamfree" <(E-Mail Removed)> wrote in message
news:451eb341$0$25783$(E-Mail Removed)...
> What kills me, is when "I" get an item which is shipped in a box 6 or more
> times the size of the item....... Talk about overkill!


Do 'ya buy much from Digikey?

Tim

--
Deep Fryer: a very philosophical monk.
Website: http://webpages.charter.net/dawill/tmoranwms


 
Reply With Quote
 
SpamFree
Guest
Posts: n/a
 
      10-03-2006, 12:11 AM
"Tim Williams" <(E-Mail Removed)> wrote in message
news:yEcUg.86$(E-Mail Removed)...
> "Spamfree" <(E-Mail Removed)> wrote in message
> news:451eb341$0$25783$(E-Mail Removed)...
>> What kills me, is when "I" get an item which is shipped in a box 6 or
>> more times the size of the item....... Talk about overkill!

>
> Do 'ya buy much from Digikey?
>
> Tim
>
> --
> Deep Fryer: a very philosophical monk.
> Website: http://webpages.charter.net/dawill/tmoranwms
>


Hmmmm........ Good ?.. Actually, of all I've ordered from, I can't actually
recall if they were among them - for sure. There's been Mouser, MCM, Some
"manufacturers", and some 2 way radio distribution centers.


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transistors john Electronic Design 183 11-23-2007 03:53 PM
How to identify diodes from diodes, transistors from other transistors, IC's and LED's Albert Electronic Basics 6 10-25-2007 08:35 AM
want to know about transistors prashant.h.tandel@gmail.com Electronic Basics 0 02-21-2007 11:17 AM
Transistors WATSON Electronic Components 1 11-25-2004 03:15 AM
Re: supply for old audio transistors (driver transistors: 2SD381 /2SB536) Michael A. Terrell Electronic Repair 15 11-28-2003 11:53 AM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93